Best gaming experience with Pix-link wifi extender

Pix-link wifi extender

The pix-link wifi extender is a 5th generation extender and most people prefer it compared with other extenders. The extender has such a high preference because of its capability and range coverage. It can cover the whole house without any connection problems. It can cover up to a 300-meter range area. Normally, the router doesn’t show any problem but if your logging-in process is not appropriate then the extender may not work perfectly. So, in such conditions, you may become trouble but this is not a big problem. You can configure the problem by yourself. For this purpose, you need to suggest some steps which will help you to solve the problem. So, let’s discuss some of the most common problems and their troubleshooting steps to get rid of the problems. For the first, you should know the correct and proper process of setting up a pix-link wifi extender. 

How to set up a Pix-link wifi extender:

  • First, connect your device with the pix link wifi extender through wireless.
  • Enter in the address bar of a web browser.
  • Now, enter the default password and username of the pix-link wifi extender. The default login password of the pix link wifi extender is shown in the outer part of the extender which is “admin”.
  • Enter and allow the required information and proceed ahead.
  • Then, press connect.

Your pix-link wif extender is successfully set up. For depth, you also visit our official site pix-link setup. On this site, the process of setting up a pix link wifi extender is described more properly. Now let’s discuss some of the most common and simple problems that you face while using the pix link wifi extender.

Why is my Pix-link wifi extender slow:

A weak signal may be the prime reason for a slow connection. Try to maintain proper distance between the router and the extender. If the distance is maximum then the extender cannot provide an actual speed. So, the distance should be minimum and as you can. If it still doesn’t work then you can also check the ethernet port. Plug the ethernet port directly to find out the fault in the wireless connection or the wired device.

Why my device isn’t connected to the Pix-link wi-fi extender:

You should first check the device you want to connect to is whether under the range getting area or not. Because if your device is at the dead zone then it is hardly possible to connect the extender to your device. So, it is better to be careful about that. Generally, the Pix-link wifi extender removes all the dead zones from your house but often there may also be such escapes where you will be enabled to get a proper connection. Therefore it will be better to keep your extender nearby the router or at the range getting area. 

How to relocate your extender to a good place:

You can find the best location to put your expander by yourself. For this cause, keep connected to your mobile phone or laptop to the wifi router you are using belkin router ip. Then, you can search for the best and the high range location. Where the rate is at the top, put your extender at the exact location capable of yourself. Based on the LED light which is brightest you can have a judgment. Because it fades as you move away from the router when you keep the extender near the router.

There may also be another reason for weak connectivity. It often depends upon the way you set up your device. So, while setting up your extender you should be careful. Because if you have set it up in the correct way then there will be no technical problem or any other issue. You have been suggested some of the easiest and simplest steps which will help you to configure out from all these problems. The suggestions will also help you to overcome all the issues easily.

Read more – How to Play Games at Onionplay

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *

No widgets found. Go to Widget page and add the widget in Offcanvas Sidebar Widget Area.