How We Do Concrete Cleaning The A Step Up Way

Concrete Cleaning

If you’re looking for a concrete cleaning that doesn’t leave a mess, you’ve come to the right place. In this article, we’ll walk you through the process of cleaning concrete and explain how our company does it. It’s an easy task when you follow a few simple steps. However, not many people know how to do it correctly. Keep reading for the inside scoop on how we clean concrete.

Move Furniture:

Before you get started, make sure you prepare the area properly. You should move any furniture, trash, or other objects from the floor. Outdoor patios should be cleared. Before you start cleaning your concrete floor, test the cleaner in an inconspicuous area to make sure you don’t cause any further damage. For basement concrete floors, you may have to move some furniture or switch rooms to ensure that the cleaning process is safe for the flooring.

Mix A Solution Of Hot Water:

Before you begin cleaning, you should mix a solution of hot water with oxygenated bleach. Make sure the water is at least 105 degrees Fahrenheit or 40 degrees Celsius. Once this solution has been mixed, the steps should be soaked for about 20-30 minutes. If you have a tough stain, you may need to let the solution set for 30 minutes before re-applying it.

Remove The Stain:

You can also use a homemade solution or pressure washer to remove the stain. After applying the cleaner, rinse the area thoroughly with clean water or a garden hose. You can also use muriatic acid as a last resort. This acid will remove tough rust stains as well as dried mortar or grout. If you are unsure, try a DIY solution first. You can even use dishwashing liquid to remove food stains.

Free Of Obstacles:

Before applying the concrete cleaner, make sure that you have an area where you can easily work. The area must be free of obstacles, including vehicles, kids’ toys, and outdoor furniture. Then, attach the nozzle to the concrete cleaning services.

Once this is completed, turn it on and begin removing the dirt. After a couple of days, you can then rinse the concrete and it should look clean again.

You can keep decorative concrete floors looking like new by regularly cleaning them. By regularly sweeping and dust mopping them, you’ll ensure that they stay looking clean and shinny.

You’ll also need to reseal them every three to four years to keep them looking good. Keeping your concrete floors clean is not hard if you follow a few simple guidelines. Just follow these tips and you’ll be on your way to maintaining stain-resistant floors.

A power washer is the most effective way to clean concrete. With it, you can remove dirt, grime, and other contaminants. But the pressure washer’s flow rate should be at least four gallons per minute. Sometimes, higher pressure is needed to remove tough contaminants or heavy tire-skid marks.

But most contractors agree that three thousand psi should do the job. So, whether you need a concrete cleaner for a business or a home, contact us today. We’re happy to help you achieve the perfect finish.

Concrete Stained:

You can also have your concrete stained with paint. This makes it easy to clean but can be frustrating if you have already painted it. The paint will stick to the surface and become difficult to remove. The most effective concrete cleaner will not damage paint, but should be used carefully and with utmost care. Then, use a dust mop to remove loose debris from the concrete surface. If the paint is still fresh, you need to allow it to dry for 24 hours before reapplying the sealant.


You can also clean your concrete with baking soda and vinegar. They both contain alkaline soap, which will loosen the oil but not break it down. These substances are ideal for porous concrete. Mix a solution of one hundred percent vinegar and ten parts water and spray it on the concrete surface. Then, mop up the solution with clean water. Afterward, you’ll have a sparkling concrete surface.

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *

No widgets found. Go to Widget page and add the widget in Offcanvas Sidebar Widget Area.